HGHome Golf Sim Review
Buying Guides

Where Your Sim PC Lives: Stands, Carts and Wall Mounts Compared

Ten golf simulator computer stands grouped by laptop, tower or tablet, plus where to place one so a swing or rebound never reaches it and how to route cables.

HGBy the Home Golf Simulator Review team · Updated October 2026
Buying Guides

If you run a golf simulator, the computer ends up in the most awkward spot in the room. It has to sit close enough for cable runs to the projector and launch monitor, but far enough from the hitting area that a shank, a toe hit or a screen rebound never reaches it. The stand you pick decides whether that works, and it also decides whether the machine stays cool and dust-free in a garage that doubles as storage.

Most stand roundups read like office furniture guides. In a sim bay the stand has three jobs: hold the right computer, stay out of the swing and the ball's path, and let cables reach the projector and launch monitor. The list below covers ten options grouped by what you run, a placement section with club-length arithmetic, and the heat, dust and cable details that decide whether a setup holds up over months rather than weeks.

How we put this together: we compared published manufacturer specs, retailer listings and owner reports, then applied the criteria below. Links may earn us a commission.

PickOur labelBest forPrice (approx.)
Amazon Basics Multi-Purpose Adjustable Portable Tripod StandLowest-cost laptop perch for a portable rigTablet, phone and portable rigsSee listing
TigerDad Height Adjustable Laptop StandSplit-level rolling stand with room for a mouseLaptops with a mouse shelfSee listing
Tatkraft Joy Portable Laptop DeskTilt and rotate for a screen you read from the matTurning the screen toward the hitting spotSee listing
Rain or Shine Golf Adjustable Height Mobile Laptop StandGolf-retailer stand with a wide topLarge laptops$149
Mount-It! Mobile Standing Height DeskPodium height for tall golfers who standTall golfers who never sitSee listing
LEVO G2-801 Laptop StandCounterweighted base that resists bumpsStability with a heavier baseSee listing
Viozon 2-in-1 Tablet and Laptop Floor StandLaptop and tablet on one poleRunning a laptop and a tablet side by sideSee listing
VIVO Universal Desktop PC Wall MountGets a tower off the floor and out of the dustTowers in a fixed baySee listing
Shop Indoor Golf Steel Adjustable Height AV CartSteel cart with a built-in power stripTower and monitor on one cart$224
Olympia Tools Pack-N-Roll Service CartThree shelves and 150 lb capacity that folds flatGarages that go back to parkingSee listing

Three questions that pick the stand for you

Three answers narrow the field quickly. Start with the computer, because it sets the weight, the mounting method and the height you need.

  1. What computer runs the sim? A laptop points you to the rolling laptop stands. A desktop tower points you to a cart or wall mount. A tablet or phone points you to the portable group. If your sim runs on a Garmin R50 or a phone app, you may only need a tablet holder and no computer stand at all.
  2. Is the bay permanent, or does the garage go back to parking? A fixed bay can take a heavier cart or a wall mount. A shared garage needs something that folds or rolls out of the way after each session.
  3. Is there a stud wall behind the hitting position? If there is, a wall mount clears the floor and keeps a tower out of the dust. If there is not, you need a stand with a wide, heavy base and locking casters.

Put those answers together and the picks look like this:

ComputerSetupFloor or wallStart with
LaptopPermanent bayFloorTigerDad, LEVO G2-801 or Mount-It! for standing operation
LaptopGarage that revertsFloorTatkraft Joy Portable Laptop Desk, built to roll around and tilt
TowerStud wall behind the golferWallVIVO Universal Desktop PC Wall Mount
TowerFreestanding bayFloorShop Indoor Golf AV cart or Olympia Pack-N-Roll
Tablet or phoneAnyEitherAmazon Basics tripod or Viozon 2-in-1

Mixed setups, such as a laptop running the sim with a tablet running a launch monitor app beside it, point to the Viozon group. For the computer side of the decision, our computer guide explains how to choose a sim computer, and the laptop guide matches laptops to projector tiers.

Ten stands, carts and mounts side by side

The table puts all ten in the order they appear in the picks list above. Prices are list prices at time of writing. Specs come from manufacturer and retailer listings, and our site has not run these stands, so read every figure as a published number. "Not stated" means the listing we checked did not give that figure, so confirm it on the spec sheet before you buy.

ProductGroupHoldsHeight rangePlatform or topLoad ratingWheels and locksWeightPrice
Amazon Basics Multi-Purpose Adjustable Portable Tripod StandTablet, phone and portable rigsTablet, phone or light device36 to 55 in16.8 x 12.6 inNot statedTripod legs, no casters listed10.1 lbSee listing
TigerDad Height Adjustable Laptop StandRolling laptop standsLaptop, with a side surface for a mouse23.6 to 35.3 in15.7 x 13.7 in main, 7.8 x 13.7 in side22 lbFour 1 in locking castersNot statedSee listing
Tatkraft Joy Portable Laptop DeskRolling laptop standsDevices 7 to 17 in27.6 to 39.2 in8 x 10 in mouse padNot statedFour 360-degree wheels, locks not stated16.09 lbSee listing
Rain or Shine Golf Adjustable Height Mobile Laptop StandRolling laptop standsLaptop30 to 42 in22 x 13.75 in with 0.7 in lipNot statedNot stated15 lb$149
Mount-It! Mobile Standing Height DeskRolling laptop standsLaptop on top, shelf for a hub or keyboard40.5 to 48.75 in23.5 x 15.75 in top, 15.75 x 8.25 in shelfNot statedLocking castersNot statedSee listing
LEVO G2-801 Laptop StandRolling laptop standsLaptops up to 16 in wide and 5 lbAdjustable, range not statedNot statedNot stated2 in locking casters29 to 35 lb (listings differ)See listing
Viozon 2-in-1 Tablet and Laptop Floor StandTablet, phone and portable rigsPhones and tablets 4.5 to 13 in, laptops 12 to 17 in32.5 to 50.7 inNot statedNot statedRolling base with anti-slip padNot statedSee listing
VIVO Universal Desktop PC Wall MountTower PC carts and mountsATX and Micro ATX towers, 4.8 to 8.3 in wideWall mountNot applicable22 lb (10 kg)Not applicableNot statedSee listing
Shop Indoor Golf Steel Adjustable Height AV CartTower PC carts and mountsTower and monitor on shelves24 to 42 in in 2 in steps24 x 18 in shelvesNot statedFour 4 in quiet casters, two lockingNot stated$224
Olympia Tools Pack-N-Roll Service CartTower PC carts and mountsThree shelves, 14.5 x 21.5 in usable each34 in open, 42 in folded14.5 x 21.5 in per shelf65 lb per shelf, 150 lb totalFour 3 in rubber swivel wheels, two lockingFrame 4.4 lb per one sourceSee listing

The safe zone: where a stand can go in a sim bay

The stand should go where the swing allows, not where the room is most convenient. Work out the safe zone first, then pick a stand that fits inside it. The arithmetic is simple and it settles most placement arguments before they start.

Start with the swing radius. A driver is about 45 to 46 in long, and a golfer's arm reach from the shoulders is about 24 to 28 in. Added together, that gives roughly 69 to 74 in, or about 5.75 to 6.2 ft, from the golfer's shoulders to the clubhead at full extension. This is a rule-of-thumb estimate, not a measurement of any one golfer, so tall players and those with long arms should allow a little more.

Our buffer is at least 7 ft (84 in) from the golfer's standing position to the stand. At the top of the radius range, 74 in leaves about 10 in of clearance. That margin covers a longer follow-through and a golfer who steps a few inches off the spot on a big swing. Treat 7 ft as the minimum, not the target you aim for.

Keep the stand behind the hitting position, never in front of the ball. The swing arc runs all the way around the golfer, so the stand needs the same clearance to the side and behind. Behind is the safer side because anything in front of the ball sits in the path of every shot you hit, and that is exactly where a flying club head or ball does damage.

Shanks and toe hits leave the mat at sharp angles, often well off the intended line. Keep the stand outside those angles, or behind netting that catches them. Screen rebounds bounce back toward the mat, so a stand that sits in front of the screen edge is in the rebound path. Keep the computer clear of both lines.

Here is what the arithmetic does to a real room. If the hitting spot sits only 5 ft from the back wall, there is no room for a 7 ft buffer behind the golfer. A wall-mounted tower on that back wall is then too close, and a stand at the side has to sit outside the shank line and the rebound angle. In that case a wheeled stand that you park at the edge of the room during sessions is often easier to live with than a fixed installation that cannot move.

Mixed-handed households change the answer. A golfer who hits from the left side of the mat and one who hits from the right may need the stand in different places. Choose a spot behind both hitting positions if the room allows it. If it does not, use a wheeled stand that you move when the player changes.

Finally, check the screen from the mat. Put the stand where you can read the screen from the hitting spot without walking through the swing area. A stand at the edge of the mat that forces you to turn and step across the hitting zone to read a number is a stand you will keep bumping.

If you are still sizing the room, our room size guide gives the floor space to plan around, and the room planning mistakes page lists common layout errors that show up once the stand is in place.

How we judged them

We compared the ten picks against five criteria. The weights below reflect how much each one matters in a sim bay, where a golfer swings within an arm's length of the stand.

CriterionWeightWhy it matters
Stays put near a swinging golfer30%Base width, weight, locking casters and centre of gravity decide whether a bumped stand tips or rolls. A tall laptop stand on small wheels is the riskiest object in a sim bay.
Fits the computer you run25%Laptop width and weight, tower size and mass, and tablet size all rule options in or out. A wall bracket for an ATX tower is useless for a laptop.
Standing operating height15%Golfers operate the sim standing, often in golf shoes. A stand that tops out below elbow height means stooping between shots.
Cable and power handling15%HDMI to the projector, USB or Ethernet to the launch monitor and power all have to reach without crossing the hitting area.
Price15%A $50 tripod and a $224 steel cart can both work. The extra money should buy stability or capacity you actually need.

We group the stands by computer type first, then order them within each group by the criteria above. Stability near a swinging golfer carries the most weight, because a stand that tips is the one that causes damage. Each stand is described from its published specs and, where they exist, from owner reports. Where listings or owner reports disagree, we say so in the text. There are no numeric scores in this roundup, because we have not run these stands ourselves and a score would imply a test we did not do.

Rolling laptop stands for a stand-and-swing setup

Laptops are light, so the stand's base and wheels matter more than its load rating. A laptop on a lightweight stand is rarely overloaded, but it can tip easily if the base is narrow or the casters are small. Look at the footprint, the lock on each wheel and the height you will work at before you look at the capacity figure.

The five rolling laptop stands below are the most common choice for a stand-and-swing setup, where the golfer stands beside the hitting spot and reads the screen from the mat. They differ mainly in height range, how the top tilts and rotates, and how much room they leave for a mouse.

TigerDad: split top with a mouse wing, but short for standing

The TigerDad stand uses an E1 MDF top on a 15 mm steel tube. Its main platform measures 15.7 x 13.7 in and tilts, and a side surface of 7.8 x 13.7 in gives room for a mouse. The height runs from 23.6 to 35.3 in, and the listed capacity is 22 lb.

The maximum height of 35.3 in sits below standing elbow height for many adults. Standing desks often sit around 38 to 46 in, so check your own elbow height before you buy. This stand suits someone who sits or crouches to operate the sim, and it is a poor match for a golfer who wants to stand the whole session.

The base uses four 1 in locking casters, which are small for a stand this tall. The listing notes slight movement at maximum height, so keep the height low when you can and keep the stand well clear of the swing. MDF tops can also wear at the edges over time, so a wipe-down after each session helps.

Tatkraft Joy: rotate the laptop toward the mat

The Tatkraft Joy is built to move. It goes from 27.6 to 39.2 in and fits devices from 7 to 17 in. The top tilts through 160 degrees and rotates through 360 degrees, so you can turn the screen to read it from the hitting position rather than from where the stand sits. A safety bar helps keep the device from sliding off.

The base is 26.38 x 20.47 in and the whole unit weighs 16.09 lb, with four 360-degree wheels. That combination makes it easy to roll out of the way in a garage that goes back to parking. The trade-off is the base itself, which may not slide under some furniture, so measure the gap under a desk or bench before you plan to tuck it away.

Because the wheels turn in every direction, the Tatkraft suits a bay where you move the stand between sessions. It is less suited to a fixed spot you never move, where a heavier base would give more peace of mind. The listing details do not state a lock on the wheels, so look for one if you want the stand to stay put during a swing.

Rain or Shine Golf stand: wide top from a golf retailer

This stand is sold through a golf retailer and lists at $149 at time of writing. It goes from 30 to 42 in in height, and its 22 x 13.75 in platform has a 0.7 in lip, which is useful for keeping a laptop from sliding. The 2 in base height and 15 lb weight suit a laptop with a big screen, including larger gaming models.

The wide top is the reason to consider this stand. A large laptop plus a hub or a notepad fits without crowding. The lip gives a bit of security at the edge, though a lip is not a strap, so use a laptop with a cover or a strap if you move the stand often.

Owner reports raise one concern worth checking before you buy: some reviewers say the clamp that holds the top in place needs re-tightening over time. Check tightness at the start of each session, and tighten it if the top shifts when you touch the edge. If that happens often, a stand with a more secure top may be the better buy, and the extra price is worth it to avoid a laptop falling during a swing.

Mount-It! podium: for tall golfers who never sit

The Mount-It! desk is a podium. It runs from 40.5 to 48.75 in and the top tilts up to 42 degrees. The 23.5 x 15.75 in top gives a large work surface, and the 15.75 x 8.25 in shelf is a good spot for a hub, a keyboard or a control box. The frame is alloy steel, and the casters lock.

The height makes this stand a clear fit for tall golfers who operate the sim standing up, but it is too tall for seated use. A shorter person would have to reach up to the screen, which is awkward. If more than one person uses the bay, check whether the height suits the shortest player as well as the tallest.

Assembly is slightly involved compared with the other rolling stands, so set aside time for it and check every fastener before the first session. Keep the casters locked at all times when the stand is in use, and keep it clear of the hitting zone.

LEVO G2-801: counterweight first, mobility second

The LEVO G2-801 has a 15 lb counterbalanced hourglass base, which keeps the centre of gravity low. It uses 2 in locking casters and a patented swing arm that adjusts height and angle. The top tilts from 0 to 70 degrees, and the unit rotates through 360 degrees. Mouse trays on either side suit either left- or right-handed players.

The stand accepts laptops up to 16 in wide and 5 lb. Check your laptop's width and weight before buying, because gaming laptops are often heavier than that. The listed dimensions are 13 x 13 x 40 in, and the build uses anodised aluminium and polymers.

Weight is where listings disagree. One source gives the total as 35 lb and another as 29 lb, so confirm the figure with the seller before you plan a move. Either way this is a heavy stand for its size, and assembly may need a second person. The payoff is that the low, counterweighted base is one of the most stable choices in this roundup for a stand that lives beside a swinging golfer.

Our laptop guide lists which laptops fit this kind of stand by projector tier, and the RoS laptop review covers one laptop option for the bay. If you are weighing a laptop against a tower for the bay, the computer guide and the PC requirements page list the specs the software expects.

Check current rolling laptop stand prices

Carts and wall mounts for a tower PC

Desktop towers weigh more than laptops and need clear airflow around the case. A cart or wall mount also keeps the tower off a dusty garage floor, where it is easy to kick and hard to keep clean. The question is whether you have a stud wall behind the golfer. If you do, a wall mount frees the floor. If you do not, a cart with a shelf and a power strip is the practical choice.

VIVO wall mount: tower on the wall, floor clear

The VIVO Universal Desktop PC Wall Mount is made of powder-coated steel and holds up to 22 lb (10 kg). It fits towers from 4.8 to 8.3 in wide and supports ATX and Micro ATX cases. The unit measures 6.1 x 8.4 x 9.3 in, and the frame is open, which helps the tower breathe. Security straps hold the case in place, and the listing gives a 3-year warranty, though you should confirm that with the seller.

Weigh your tower before you buy. Gaming towers can weigh more than 22 lb, and a case close to the limit leaves no margin for a heavier graphics card or extra drives. Weigh the case as it will actually run, because that is the figure that loads the mount.

The mount must go into studs, and that is the main constraint. Put it behind the golfer, not beside the screen where balls and rebounds can reach it. The straps also limit how large a case you can fit, so check the case depth and the strap length against the listing before you drill. Mounting on a wall you have never opened can hide wiring, so check with a stud finder and a plan for the cable run.

Shop Indoor Golf AV cart: tower, monitor and power in one

The Shop Indoor Golf Steel Adjustable Height AV Cart is the most complete option in the tower group, and it lists at $224 at time of writing. It is built from steel with 24 x 18 in shelves, each with a 1/4 in lip, and the top has a safety mat. The height adjusts from 24 to 42 in in 2 in steps, so you can set the top to the level you read the screen from.

The four 4 in casters are quiet, and two of them lock, which is the feature you want during a swing. Assembly is tool-free, which keeps setup short. Locking the brakes before every session is still the first step, whatever the frame is made of.

The built-in three-outlet power strip with a 15 ft UL/CSA cord is the feature that sets this cart apart. It lets you plan a single power run from the wall to the cart rather than a set of extension leads across the floor. Run that cord along the wall, not across the hitting mat. If your wall outlet is far from the cart, plan the run before you position the cart, because a short cord forces you to place the cart near the outlet.

Olympia Pack-N-Roll: capacity and fold-flat storage

The Olympia Tools Pack-N-Roll Service Cart is the most flexible of the three. It has three shelves, each with 14.5 x 21.5 in of usable space, rated at 65 lb per shelf and 150 lb total. That is enough room to put the tower on the bottom shelf, with a monitor or laptop on top, and keep the tower's weight low where it helps stability.

The cart opens to 34 in high, 15 in wide and 26.12 in deep, and folds down to 42 in high, 15 in wide and 8 in deep. That fold-flat depth is the reason to consider it for a garage that returns to parking. Fold it between sessions and roll it into a corner, and the floor space is free for parking again.

Two of the four 3 in rubber swivel wheels lock, which keeps the cart steady during a swing once those brakes are on. The listing says no assembly is needed, with screws and lock nuts at the pivots. The trade-off is the material: the plastic parts may wear over time, and frequent folding puts more stress on the pivots. The listing gives a frame weight of 4.4 lb, which looks low for a three-tier cart of this size, so check that figure with the seller before you plan to lift it.

Compare carts and wall mounts for towers

Tablet, phone and portable rigs

Not every sim needs a computer stand. If your sim runs on a Garmin R50 or a phone app, a tablet holder may be all you need, and a rig that folds away after each session suits a garage that goes back to parking. Portable stands also work for range-style setups where the screen sits in a fixed place and the launch monitor does the measuring. The two picks in this group are the lightest options in the roundup, and each has a different trade-off between cost and capacity.

Amazon Basics tripod stand: cheap, light, and top-heavy if bumped

The Amazon Basics Multi-Purpose Adjustable Portable Tripod Stand has a 16.8 x 12.6 in platform, adjusts from 36 to 55 in, and weighs 10.1 lb. Raised felted edges on three sides keep a device from sliding off, and wing fasteners make height changes quick. It folds for storage and has tripod legs, which give a wide footprint for the weight.

A tripod is stable for its weight, but a light stand tips more easily than a counterweighted base, and a bump at the top of the height range is the moment it is most likely to go over. Keep it well clear of the swing and the rebound line, and extend the height only as far as you need. The listed tilt is limited, and at 36 in the minimum height is high for some seated users, so check the height against where you will stand or sit.

The tripod works well for range-style portable setups with a small monitor, a tablet or a phone, including setups built around the R10 or MLM2PRO. It is not the right choice for a heavy laptop or a tower, because the platform and the light frame are sized for lighter devices.

Viozon 2-in-1: laptop and tablet together

The Viozon 2-in-1 Tablet and Laptop Floor Stand is made from aluminium alloy and goes from 32.5 to 50.7 in, or 825 to 1,290 mm. It holds phones and tablets from 4.5 to 13 in and laptops from 12 to 17 in, so it can carry a laptop and a tablet at the same time. The top rotates through 360 degrees, and integrated cable management keeps the leads from sprawling. The base is a rolling unit with an anti-slip pad.

The most useful setup here is a laptop running the sim with a tablet running a launch monitor app beside it. One pole holds both, and the rotation lets you angle each screen toward the hitting spot. The stand is heavier and less portable than a tripod, so it suits a bay you set up once and keep rather than one you pack away every session.

Because it has a rolling base, check the casters and the anti-slip pad before you load both devices. A laptop plus a tablet adds weight near the top of the pole, so keep the height low when you use both screens. Route the cables through the built-in management so nothing hangs across the mat.

Heat, dust and airflow in a garage sim

A garage is hard on computers. Dust settles on every fan, temperatures swing from a cold winter morning to a hot afternoon, and the floor gets swept only now and then. The stand decides how much of that reaches the case, so treat airflow as part of the placement decision rather than an afterthought.

  • Gaming laptops pull air from the bottom. A solid platform with a lip can block the vents, so raise the rear edge or choose an open shelf.
  • Towers on a cart or wall mount stay above the floor, where dust is heaviest. Clean the filters on a schedule, and the maintenance schedule sets out a routine you can follow.
  • Garages get hot in summer and cold in winter. Check the operating temperature range for the PC and the launch monitor, since those figures vary by device and the maker's manual is the reliable source.
  • Keep the PC out of direct sun and away from the projector exhaust. A computer that sits beside warm exhaust runs hotter than the same machine on the other side of the room.
  • Use a surge protector for the computer. The Shop Indoor Golf cart includes a power strip with a UL/CSA cord, but it is not described as a surge protector, so check before you rely on it.

A stand that sits the computer on a closed surface can also trap heat under the case, especially a laptop that sits flat. The fix is cheap: a small gap under the rear edge, or an open-frame stand, keeps air moving. Those few centimetres of clearance do more for a laptop's fans than most of the extras sold with stands.

Cable runs from the stand to the projector and launch monitor

Cables decide the placement more than most buyers expect. A stand that looks perfect on the floor plan can be a poor choice once the HDMI run has to go up and across the room. Plan the route before you choose the spot.

  1. Measure from the stand to the projector. Ceiling projectors often need 20 to 35 ft of HDMI once the cable is routed up and across the room. That range is our estimate, so measure your own route, including the drop from the ceiling and any corners.
  2. Pick the cable type for the run. Passive HDMI is reliable for 4K at shorter lengths. Longer runs typically need an active or fiber optic HDMI cable, so check the length guidance for the cable you buy before you order.
  3. Decide how the launch monitor connects. Wi-Fi, Ethernet or USB depends on the unit, and a wired link is steadier. If the unit supports Ethernet or USB, route that cable to the computer rather than relying on Wi-Fi alone. Our Wi-Fi drop fixes cover the common causes of dropped links, and the shot delay fixes page covers lag between a swing and the result on screen.
  4. Run cables along walls or overhead, never across the hitting mat. Floor cord covers are fine outside the swing area, but a cover that sits in the path of a swing is a trip hazard and a place a club can catch.
  5. Cut down on trips to the stand. A wireless keyboard and mouse or a dedicated control box lets you start a round and reset a shot without walking back to the computer. Our sim control boxes roundup covers the options.
  6. Leave a small slack loop at the stand end of each cable, so the stand can be moved for cleaning or folding without pulling a connector out of the back of the computer.

Cheaper options: shelves, enclosure tables and DIY

You do not always need a rolling stand or a cart. Several cheaper routes work well, as long as the spot meets the safe-zone rules above.

A wall shelf behind the hitting position, set at standing height, can hold a laptop for little money. Anchor it into studs, and check the shelf's rating against the laptop's weight with a margin to spare. A shelf that sags or shifts under a laptop is worse than no shelf at all, because the laptop is then one bump away from a fall.

Some enclosures and packages include a side table or shelf. Whether a table is included depends on the package you buy, so check the contents before you add a stand to the cart. If the table is part of the package, you may not need a separate computer stand at all.

A generic rolling utility cart works if it has locking wheels and a lip along the shelf edges. The lip keeps a laptop or small monitor from sliding, and the wheels must lock before every session. A cart without locks is a cart that drifts into the swing.

If your sim runs on a phone or tablet app, you may only need a tablet clamp on a wall or on a stand you already own. That is a much smaller purchase than a full computer stand, and it keeps the device at eye level.

Avoid stacking a laptop on a box beside the mat. A stack is unstable, the box is likely to be bumped, and a box blocks the airflow that the laptop needs. A box that is only a temporary fix can become the permanent one, so buy a stand early if you already know the box is where the laptop will sit.

First-session setup checklist

Run through this list before the first full session. It takes a few minutes and catches most placement problems before they become a broken laptop or a bent projector.

  • Stand placed behind the hitting position, at least about 7 ft from the golfer, outside the shank and rebound lines.
  • Casters locked, with the stand on a level floor.
  • Screen tilted so it can be read from the mat.
  • Vents clear, with no platform lip blocking the airflow.
  • Cables routed around the hitting area, not across it.
  • Surge protector in place for the computer.
  • A few slow practice swings with your longest club to confirm clearance.

After the first week, check the stand again. Look for loose clamps, loose casters, cables that have pulled tight and dust on the vents. A short check like this catches the problems that build up slowly in a garage.

Computer stand questions we get

The questions below cover the placement and safety points that remain after the sections above. For projector positioning, the projector mount roundup and the 4K projector guide explain how mount position changes the image. For interference with launch monitor readings, the lighting interference guide covers what to keep out of the sensor's view.

Can the same stand hold my projector?

A tripod stand such as the Amazon Basics platform can physically take a small projector, but a sim projector needs a fixed position set by its throw distance and the screen size. If the stand gets bumped, the image shifts and the edges stop lining up with the screen. Use a dedicated projector mount for the projector and keep the computer stand as a separate piece.

How do I run the simulator without walking back to the computer each shot?

Most people run the sim with a wireless keyboard and mouse, a dedicated sim control box or keypad, or a remote control app on a phone or tablet, though what each app supports varies by software. Many sims advance automatically after each shot, which cuts down on trips to the computer. Check which controls your software supports before you decide where the stand goes.

Will a metal stand or cart interfere with my launch monitor?

Keep metal objects out of the field of view of a radar launch monitor and out of the view of camera units, since maker guidance covers this and the details vary by device. Metal shelves can also weaken a Wi-Fi link a little, so use a wired connection where you can. Check your launch monitor manual for the exact placement rules.

Should a stand be anchored if children or pets use the room?

Tall, light stands tip easily, so lock the casters, keep heavy items low on the stand, and consider an anti-tip strap to the wall for carts or podium stands. A wall mount removes the tip risk, but it needs to be fixed into studs. If children or pets spend time in the room, a lower and heavier stand is the safer choice.

Is a gaming laptop or a desktop tower easier to fit into a small bay?

A laptop needs only a small rolling stand and can be moved in and out of the bay easily. A tower needs a cart or wall mount plus a separate monitor or remote control, but it runs cooler and is easier to upgrade. If space is tight, a laptop is usually the easier fit, while a tower suits a bay you keep set up permanently.

Related reading