Getting E6 Connect Running on a FlightScope Mevo, From Product Key to First Shot

FlightScope's Mevo line runs E6 Connect, the simulator software made by TruGolf. It is a separate product from FS Golf, FlightScope's own app. Getting the two working together is a short job once everything is in place, but most people who get stuck do so for predictable reasons: the license works differently from what they expected, two apps fight over the radar, or the unit sits somewhere it can't see the ball clearly.

This guide starts with the parts that cost money or time if you skip them, then walks through the pairing order, indoor placement, and a symptom table for drops and missed reads. If you're shopping secondhand, read the license section before you hand over any money.

How we put this together: we compared published manufacturer specs, retailer listings and owner reports. Links on this page may earn us a commission.

The whole process in one paragraph

Update the Mevo in FS Golf, install E6 Connect, redeem the product key that ships in the box, point E6 at FlightScope as the tracking system, join the Mevo's own Wi-Fi network, then pick a course or the range and hit a test shot. Most failures come from two places: another app holding the radar, and a weak or 2.4 GHz connection. The bundled license belongs to the first owner, so a used unit usually arrives without one. Everything below expands on those three points.

Pre-flight checklist before you open E6

Work through this before you open E6. Each item is a point where setups tend to stall halfway through.

• FlightScope account created and the device registered in FS Golf
• Firmware updated through FS Golf first, which keeps radar and data tracking current
• Product key card from the box in hand (new units only)
• E6 account created with TruGolf
• Playing device meets the minimums below
• PC users: an internal 5 GHz Wi-Fi card rather than a USB dongle, confirmed against E6's current requirements
• Mevo serial number visible, since it is usually the Wi-Fi password (check the label on your unit, as the layout varies by model)

Units and platforms that pair with E6

All three Mevo models are listed as compatible with E6 on iOS, Android and PC. The table below shows the picture at a glance.

Device	iOS	Android	Windows PC	Notes
Mevo (original)	Yes	Yes	Yes	Confirm Android support for the original Mevo in E6's current release
Mevo Gen2	Yes	Yes	Yes	Follow the pairing steps below
Mevo+	Yes	Yes	Yes	Indoor spin tips are in the placement section

If you're not sure which unit you have, which Mevo you own and what it measures explains the differences. For a closer look at each unit, see our Mevo+ review and the Mevo Gen2 review.

Minimum specs for the phone, tablet or PC

The listed floor for a phone or tablet is iOS 16 or later and Android 6.0 or newer. Confirm both against E6's current requirements before you buy anything, because the floor can move with each release.

For a PC, the floor is an Intel Core i5 class CPU or better, 8 GB of RAM, and DirectX 12 graphics at roughly GTX 1070 level or equivalent. Use an internal 5 GHz Wi-Fi card rather than a USB dongle.

Treat these as the minimum. A stronger GPU gives smoother frame rates, and a bigger projected image puts more load on the card. If you're building a desktop around this, the PC requirements guide and the computer guide go deeper.

License ownership: new box, used unit, new hardware

Read this section before anything else, because it's the part people tend to find out about too late.

New Mevo, Mevo Gen2 and Mevo+ units ship with an E6 Connect license covering 8 or 12 courses, depending on the package. Check the bundle listing for the count that comes with the unit you're buying. That bundled license is tied to the original owner's account, and it does not transfer when the unit is resold.

Buying secondhand: plan for your own E6 access

A used Mevo doesn't come with the previous owner's E6 courses. Budget for an E6 subscription or course pack from the start, or use FlightScope's own FS Golf modes and other compatible software in the meantime. Ask the seller whether the product key was already redeemed, since a redeemed key may not work a second time. TruGolf can tell you the current rules on key reuse, so check there before you rely on one.

Moving your license to a new device or computer

If you're upgrading hardware, you can unbind the license in the E6 account portal and bind it again on the new device. The steps differ by platform, and licenses are tied to a specific platform or device, so check the portal before you switch between iOS and PC.

Check Mevo+ bundle pricing ↗

Pairing order, step by step

Follow these in order. The sequence matters, especially steps 2 and 5.

1. Open FS Golf, sign in, connect the Mevo, and install any firmware update.
2. Fully close FS Golf. Two apps talking to the radar at once cause Wi-Fi conflicts and drops.
3. Install E6 Connect on iOS, Android or PC and sign in with your E6 account.
4. Redeem the key: go to Licenses, then Product Key, then Redeem, and type the key exactly as printed.
5. In E6, open Settings, then System Config, then Tracking System, and choose FlightScope and your exact model: Mevo, Mevo Gen2 or Mevo+.
6. Join the Mevo's Wi-Fi network. The SSID is printed on the unit, and the password is usually the serial number.
7. Reopen E6, choose Play or Practice from the main menu, pick a licensed course or the range, and hit a test shot.

Menu labels change between E6 releases. If a name in these steps doesn't match what you see, check FlightScope's and TruGolf's support pages for the current wording rather than guessing.

Placing the Mevo indoors so E6 gets clean data

The radar needs to see enough ball flight before the ball reaches the screen, and placement is behind most of the bad reads people report. Follow FlightScope's distance guidance for your model. For the Mevo+, that guidance is roughly 7 to 8 feet behind the ball, with about 8 feet of flight indoors. Confirm those figures against FlightScope's current documentation before you measure out your bay.

• Keep the unit level and aimed down the target line
• Keep it away from fluorescent lights and large metal objects that can disturb tracking
• Mevo+ owners: FlightScope's guidance recommends a metallic dot sticker on the ball for more reliable spin reads indoors. Check its current guidance before assuming the same for the Gen2.

If you're still deciding how much depth you need, the room size guide covers it. If you want to know what each number on screen means, every Mevo+ data point explained is the place to start.

Symptom table: drops, odd distances and missing shots

Start from what you see on screen, then work through the likely cause and fixes in order. Most problems resolve at the first fix.

What you see	Likely cause	First fix	If that fails
"Sim disconnected" message	Another app holding the radar, or the Wi-Fi link dropping	Fully close FS Golf and any other golf app, then reopen E6	Move the playing device to a 5 GHz network and check the Mevo's Wi-Fi link
Shots not registering	Ball flight too short for the radar to read, or poor placement	Recheck placement and the flight distance to the screen	Update firmware and retest
Distances long or short	Wrong club selected, or environment settings off	Select the club you're hitting in E6	Check altitude, elevation and lie settings
Short chips never register	Very slow, short shots fall below what the radar picks up indoors	Use a firmer chipping stroke	Update firmware and recheck placement
Connection drops when someone opens another app	Another app grabbing the radar mid-session	Close the other app	Restart E6 and reselect FlightScope as the tracking system

Connection keeps dropping mid-session

Wi-Fi is the usual culprit here. Use a stable 5 GHz link wherever you can, because 2.4 GHz suffers more interference from everything else in a house. Stop the playing device from sleeping during a round. If the drops continue, close FS Golf and any other golf app, then reselect FlightScope in E6 settings.

Another app grabbing the radar mid-round is a known cause of drops, and it's easy to miss if you have a second window open on the same machine. The Wi-Fi drop troubleshooting guide walks through the usual fixes in order.

Distances look wrong or shots vanish

Start by rechecking placement and the flight distance to the screen, since most odd readings trace back to the unit's position. Next, select the club you are hitting in E6. Doing so helps the radar lock on faster and more precisely.

After that, check the environment settings in E6. Altitude, elevation and lie change ball flight, and they make a real difference on hilly courses. Keep the hitting area level as well. A sloped mat or floor can make the setup harder to keep consistent from shot to shot.

Chips and short putts that never register

Very slow, short shots can fall below what the radar picks up indoors. The fix is usually a firmer stroke, not a new setting. On short putts, the same advice applies, and it's worth confirming the unit still has a clear line to the ball.

Update the firmware through FS Golf and retest, since putt sensitivity also depends on placement. E6 has putting aids such as gimme settings for rounds. The exact names change between releases, so check TruGolf's support pages for the current options instead of hunting through menus.

What keeping E6 costs after the bundled courses

The bundled license covers a fixed course count, 8 or 12 depending on the package. Once you've played through that library, a larger selection means a paid E6 subscription tier. TruGolf publishes the current price list, and the tiers change, so check it directly before you budget. The annual cost sits on top of whatever you paid for the hardware, which is why it's worth reading about how simulator software subscriptions are priced before you commit.

FS Golf covers range and practice data without E6, so you aren't stuck with a single app if you only want to hit balls. Other software options exist for Mevo+ owners as well, though compatibility lists change, so check them before you buy. If you're weighing a wider change, alternatives to FlightScope units and platforms with the biggest course libraries are the right next reads.

Compare FlightScope Mevo models ↗

Mevo owners' questions about E6

Will E6 still load in a garage with no internet?

You need an internet connection for the first login and for license validation. Once content is downloaded, play can continue offline, though E6's current policy is worth checking before you rely on it. Download the courses you want while you still have a connection. The Mevo's own Wi-Fi link is separate from internet access, so the unit can still reach your device even when your router has no uplink.

Why do my carry numbers in E6 differ from the FS Golf app?

E6 and FS Golf use different ball-flight models and default environment settings, including altitude, temperature, fairway firmness and course elevation. Because of that, compare carry rather than total distance. Set the environment settings to match before you compare the two apps.

Is the bundled 8 or 12 course package enough for most owners?

For range work and the occasional round, the bundled courses are usually enough. Regular players tend to want more variety, and that means a paid tier or other software. Check the current course count for your package before you decide.

Can I redeem a product key that a previous owner already used?

Bundled licenses are tied to the original owner and do not transfer when the unit is resold. If you buy a used Mevo, plan on your own E6 access from the start. A key that has already been redeemed may not work a second time, so check with TruGolf before you rely on one.

Does the Mevo Gen2 need metallic stickers indoors like the Mevo+?

FlightScope recommends metallic dot stickers on the Mevo+ for indoor spin reads. Check FlightScope's current guidance for the Gen2 before assuming the same advice applies, because the two units are not guaranteed to need the same setup.